Why you need to clean the water cooler and how to do it?

But I drink purified water from the cooler, how can it get dirty..." I'm sure that's exactly the thought that popped into your head after reading the title of this article. Well, we are ready to explain everything! And in case you don't have a cooler yet, note that Nero's drinking water delivery has them for sale. The range of our services is Obolon district, we will deliver the selected cooler to your home, office or other facility free of charge and quickly.
Any drinking water contains trace elements that provoke the formation of scale on heating elements. In addition, during long-term use of the cooler, a biofilm builds up in the dispenser, which can later give the water an unpleasant smell and a strange taste. And in general, for the formation of bacteria, all that is needed is the contact of oxygen and water, so... We advise you not to neglect this kind of "care" for the cooler! And we, of course, will help you cope with this task.
The first (and most important) rule is that you can only clean the cooler when it is disconnected from the electrical network. It is also better to use purified water for this procedure, because tap water, due to a significant percentage of chlorine in the composition, can damage the parts or introduce bacteria. Before cleaning, be sure to drain the water from the faucets and heating and cooling units (by removing the valves on the bottom of the unit).
Faucets must be removed and cleaned with a small brush or brush. It is also important to thoroughly rinse the drip tray, because it creates an ideal environment for bacteria to multiply. The bottle receiver is removed by turning it counterclockwise.Since the above parts of the cooler will be in direct contact with water, they are washed with filtered water and dried.
Next, clean the tank with detergent, which must then be washed by opening the valves at the bottom. You can get rid of scale using the usual, well-known methods: a mixture of soda and vinegar, oxalic acid or even the same Coca-Cola. We advise you to make a solution of 100 grams of citric acid and 5 liters of water and pour it into the tank after washing. Before that, return the bottle receiver to its place. Make sure the tanks are full, turn on the cooler and leave it with the solution for a few hours, then drain the liquid through the taps and valves on the bottom and flush the cooler several times.
To take care of the appearance of the cooler, wash its surface with either ordinary dish gel, table vinegar, or a weak solution of ammonia. The walls of the cooler, the control panel, the display can be wiped with wet wipes.
Remember! When cleaning the cooler, you should not use abrasive powders, organic solvents, chlorine-containing products and liquids with acetone, gasoline, kerosene, etc. In no case do not immerse the cooler in water. The cleaning procedure should be carried out once every few months (depending on the intensity of use of the device).
Here is the last step: install a new bottle and be sure of the quality of the water you consume! The supply of drinking water from Nero provides the Obolon district with its products of the highest quality, because there are a large number of offices, schools, kindergartens and other institutions that must take care of the quality of water for employees and visitors.Our drinking water is carefully filtered and safely bottled, we are confident in its quality and have been taking care of our customers' health for more than 10 years.
Order drinking water from Nero and feel the crystal purity to taste!